Webspace43

発注したおもちゃ到着しました。


中身は

オーバークロックも対応
サイズは見ての通りＲＸ-７（43）サイズ

メモリーは8Ｇを８００円程度で入手、クラス１０（４以上が必要らしい）


ＯＳをＳＤカードに書き込んで全ての配線を繋ぎ、スマホ電源でＯＮ

見ての通り刺したのはＳＤＣＡＲＤとＬＡＮケーブルのみ
どうやって操作するかって？
ＳＳＨでＰＣから操作しますのでモニターは必要なし
※正しメモリーカードにＯＳが正しく書き込めている場合に限る

ＰＣから初期画面をみる

半分わかって半分不明かな？

この画像は上半分はＯＳのみの時のメモリーカード状況

下半分はある程度ソフトを入れた現状状態で4％ほど使用している。

ＷＥＢＭＩＮを入れてみた。


使い慣れたデザインに変更（日本語も文字化け無し）


問題はｒｏｏｔが無い

オーナーもRootになっているがルートではログインできません。
ユーザーはpiのみ
ｓｕでもパスが無いので入れない。
rootのパスを設定できない。
以上の事からルートになれずグループもユーザーも変更できません。
自動でＷｓ43でレクトリーを全てコピーしようとしましたが出来ませんでした。
テスト画面の表示は確認したので使えるはず。
ftpで転送するのかな？　ヤミヤミです。

これまた４３と同じで長く遊べそうなおもちゃです。
皆さんもお試しあれ。

－－－－－－ここからはした事控え　----------------
ＬＩＮＵＸを触った事がある人しかわからない呪文です。

sudo apt-get update

• ------------------------
必要なファイルのインストール
$ sudo apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl apt-show-versions
ダウンロード
$ wget http://prdownloads.sourceforge.net/webadmin/webmin_1.590_all.deb
webminのインストール
$ sudo dpkg --install webmin_1.590_all.deb
webmin専用rootパスワードの設定

raspbianの場合、rootアカウントがないのでrootでログインができません。なのでwebmin専用にrootアカウントとそのパスワードを設定します。
$ sudo /usr/share/webmin/changepass.pl /etc/webmin root

たとえばwebmin専用rootのパスワードがhogehogeなら
$ sudo /usr/share/webmin/changepass.pl /etc/webmin root hogehoge
• --------------------------------
Webminを日本語表示（OLDスタイル）に変更（使い慣れているから）

ＵＰＤＡＴＥ

Downloading http://prdownloads.sourceforge.net/sourceforge/webadmin/webmin_1.670_all.deb ..
Downloading http://downloads.sourceforge.net/project/webadmin/webmin/1.670/webmin_1.670_all.deb ..
Downloading http://jaist.dl.sourceforge.net/project/webadmin/webmin/1.670/webmin_1.670_all.deb (20.75 MB) ..
Received 1024 bytes (0 %)
Received 2.08 MB (10 %)
Received 4.15 MB (20 %)
Received 6.23 MB (30 %)
Received 8.30 MB (40 %)
Received 10.38 MB (50 %)
Received 12.45 MB (60 %)
Received 14.53 MB (70 %)
Received 16.60 MB (80 %)
Received 18.68 MB (90 %)
Received 20.75 MB (100 %)
.. download complete.
どのパッケージもシグネチャの検証をしていません

Running DPKG to upgrade Webmin .. Please wait a minute until it is complete before continuing.

(Reading database ... 90976 files and directories currently installed.)
Preparing to replace webmin 1.590 (using .../86156_4944_2_upgrade.cgi) ...
Unpacking replacement webmin ...
Setting up webmin (1.670) ...
Webmin install complete. You can now login to https://raspberrypi:10000/
as root with your root password, or as any user who can use sudo
to run commands as root.
• --------------------------
mysql　インストール
sudo apt-get install mysql-server mysql-client

root password ２回入れる
• ---------------------------
ＰＨＰ　インストール
sudo apt-get install php5 php5-mysql php5-curl php-xml-rpc
• --------------------------
Apache　インストール
sudo apt-get install apache2
• ------------------
ＣＯＮＦＩＧ

# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives and /usr/share/doc/apache2-common/README.Debian.gz about
# Debian specific hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf.d
# | `-- *
# `-- sites-enabled
# `-- *
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# In order to avoid conflicts with backup files, the Include directive is
# adapted to ignore files that:
# - do not begin with a letter or number
# - contain a character that is neither letter nor number nor _-:.
# - contain .dpkg
#
# Yet we strongly suggest that all configuration files either end with a
# .conf or .load suffix in the file name. The next Debian release will
# ignore files not ending with .conf (or .load for mods-enabled).
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections, and which
# of these ports are used for name based virtual hosts.
#
# * Configuration files in the mods-enabled/ and sites-enabled/ directories
# contain particular configuration snippets which manage modules or virtual
# host configurations, respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite. See
# their respective man pages for detailed information.
#
# * Configuration files in the conf.d directory are either provided by other
# packages or may be added by the local administrator. Local additions
# should start with local- or end with .local.conf to avoid name clashes. All
# files in conf.d are considered (excluding the exceptions noted above) by
# the Apache 2 web server.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at );
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
LockFile ${APACHE_LOCK_DIR}/accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves

StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0


# worker MPM
# StartServers: initial number of server processes to start
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
# graceful restart. ThreadLimit can only be changed by stopping
# and starting Apache.
# ThreadsPerChild: constant number of worker threads in each server process
# MaxClients: maximum number of simultaneous client connections
# MaxRequestsPerChild: maximum number of requests a server process serves

StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxClients 150
MaxRequestsPerChild 0


# event MPM
# StartServers: initial number of server processes to start
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxClients: maximum number of simultaneous client connections
# MaxRequestsPerChild: maximum number of requests a server process serves

StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxClients 150
MaxRequestsPerChild 0


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#

Order allow,deny
Deny from all
Satisfy all


#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
# It is also possible to omit any default MIME type and let the
# client's browser guess an appropriate action instead. Typically the
# browser will decide based on the file's extension then. In cases
# where no good assumption can be made, letting the default MIME type
# unset is suggested instead of forcing the browser to accept
# incorrect metadata.
#
DefaultType None


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include mods-enabled/*.load
Include mods-enabled/*.conf

# Include list of ports to listen on and which to use for name based vhosts
Include ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see the comments above for details.

# Include generic snippets of statements
Include conf.d/

# Include the virtual host configurations:
Include sites-enabled/
• ------------------
apache 起動
sudo service apache2 start

hp top test 以下の表示がでます
• ----------------
It works!

This is the default web page for this server.

The web server software is running but no content has been added, yet.
• -------------------
ｒｏｏｔが無い
adduser: Only root may add a user or group to the system.
• -----------------　今日はここまで　---------------
ＣＧＩが動くかテストしたかったがまた後日に

これで１年以上ＷＷＷを稼働させているサーバーがありましたので
デモドリさんも行けるのではと思います。
ＳＤＣＡＲＤ　３２Ｇなら容量問題はＯＫ？
後はメモリーカードの耐久性次第なんでしょうかね。
ＨＤＤ買ってマウントしたほうが無難かも。